Blog

Simple Doors:  Due to the budget constraints and to upgrade a renovation project within a small budget frame can be quite a challenge especially when needed to replace a kitchen with a new set of Cabinet Doors.  A simpler solution is to have doors made out of the same material as the Cabinet Panel Board.

The whole or complete idea is to have a place or kitchen not to be fancy but is where one can have additional room and spaces to handle all the casters or clouded  materials so that the environment will be more clear, neat, vibrant, healthier and alive.  This alternative is a better way of resolution for a considered investment.

BELUU welcome any comments, feedbacks, ideas, subjections, contributions, inputs as well as any opinion to ensure better quality services and company improvement.

BELUU will continuous to produce great quality design contents and image photos

Door Panel:  Look to the picture on the right is a sample of piece of Panel of a solid door.  It is a piece of Raised Panel with profile on four sides readily to be inserted into its rails.  Simply put, a Panel is the middle or center piece of a solid wood door.

There are two kinds or types of panel:  Raised Panel and Flat Panel.  Raised Panel most often has same thickness as its rails and has a variety of choice profiles all around it.  On the other hand, a Flat Panel is simply a thin piece of board surrounded by three quarter inches rails.  It is usually about a quarter inches in thickness, and because it is already so thin there isn't any more room for profiles to be made on it.  Still not sure what they looks like, there are 6 bottom image samples under Door Specimens in the Portfolio Section of this website for references.

BELUU welcome any comments, feedbacks, ideas, subjections, contributions, inputs as well as any opinion to ensure better quality services and company improvement.

BELUU will continuous to produce great quality design contents and image photos

Folding Top:  The lack of space in modern living has become quite common in today's world.  A Folding Table will fit the situation nicely.  To construct a piece of folding table top of any shape or pattern is to have a piece of surface drew or marked with a shape, style or pattern to an individual liking.  Cut the piece of top in half for half folded and into 3 sections for folding on both sides with a table saw.  next to follow is to size and shape by cutting the already marked shape or pattern style into its forms.

Construct the body or legs for the top to sit or attached on.  Choose the finishes with one's personal preference.  Be sure to follow the standard finishing procedure guild lines from the basic to a complete finishing process.  There are finishing hints of various methods in presented in previous blogs for references

BELUU welcome any comments, feedbacks, ideas, subjections, contributions, inputs as well as any opinion to ensure better quality services and company improvement.

BELUU will continuous to produce great quality design contents and image photos